Shop fox SHOP FOX W1747, Руководство пользователя

Страница: 21 / 56

-19-
W1747 20" Planer
O
PE
R
AT
IO
N
S
The infeed and outfeed rollers power the stock through
the planer while keeping boards flat and providing a con-
sistent rate of movement.
The power feed features high/low feed rates. Use the
different feed rates as stated below:
Low Feed Rate .............................Dimensioning Pass
High Feed Rate .................................. Finishing Pass
Figure 10
illustrates the three different positions of the
feed control knob. Moving the knob toward the machine
(
Position A
) produces the high feed speed (23 FPM) mov-
ing away from the machine (
Position C
) produces the low
speed (18 FPM) and moving the knob to the center posi-
tion (
Position B
) places the gearbox in neutral.
The speed should only be changed when the machine is
running.
Feed Speed
� � �
Figure 10.
Feed control knob positions.
NOTICE
Only change the speeds when the planer is running,
but DO NOT attempt to change speeds during any
cutting operations or damage to the gearbox will
result.