Shop fox SHOP FOX W1747, Руководство пользователя

Страница: 15 / 56

-13-
W1747 20" Planer
SE
T
U
P
To attach the table extension wings, do these steps:
1. With the help of an assistant, attach the table
extension wings to the planer table (
Figure 4
) with
the M8-1.25 x 25 hex bolts. Finger tighten the bolts
for now.
2.
Install the M8-1.25 x 20 set screws (
Figure 4
) in the
holes in the bottom of the wings.
3. Check table-to-extension wing alignment ( Figure
5
) with a straightedge and adjust the leveling set
screws until the table and wings are flush.
4. Tighten the hex bolts.
Figure 4
. Extension wing fasteners and
leveling controls.
Figure 5
. Leveling extension wings and
table.
Extension Wings
Extension wings are heavy and could cause per-
sonal injury if dropped during installation. Have an
assistant hold the table while you fasten it to the
planer.
Hex Bolts
Set Screws