Shop fox SHOP FOX W1747 Скачать руководство пользователя страница 23

Страница: 23 / 56

-21-

W1747 20" Planer

ACCESSORIES

Planer Accessories

The following planer accessories may be available through your local Woodstock International Inc.

Dealer. If you do not have a dealer in your area, these products are also available through online deal-

ers. Please call or e-mail Woodstock International Inc. Customer Service to get a current listing of deal-

ers at: 1-800-545-8420 or at

[email protected].

The

SHOP FOX

Heavy-Duty Roller Stands and Roller Tables

make

your planer safer and easier to use. All models feature convenient

hand knobs for fast height adjustment and offer rigid steel construc-

tion. These stands are invaluable for supporting long workpieces on

your planer.

D0254

D2273

D2274

The

D2271

SHOP FOX

Heavy-Duty Roller Table

is a versatile roller

table wherever you need extra workpiece support for up to a 1,000

lb. capacity. It features all-steel welded construction and it mea-

sures 19" x 65" long. The roller table also comes with 9 ball bear-

ing rollers with four independently adjustable legs for any leveling

requirement. The roller table is also adjustable in height from 26

⁄

to 44

⁄

The

W1218 Rotacator

makes a planer setup process easier and

more accurate for adjusting the table rollers, feed rollers, chip

breaker, and the pressure bar if equipped on your planer. This tool

is a rotating dial indicator on a magnetic base. Shown to the right,

this handy device measures table-to-cutterhead alignment and the

table roller height. The Rotacator

�allows you to set your table

within 0.001" from being parallel with the cutterhead.

Содержание SHOP FOX W1747

























































Результаты поиска

Содержание SHOP FOX W1747

Отзывы:

Похожие инструкции для SHOP FOX W1747

Бренды по названию

Популярные бренды

Shop fox SHOP FOX W1747, Руководство пользователя

Результаты поиска

Содержание SHOP FOX W1747

Отзывы:

Похожие инструкции для SHOP FOX W1747

Бренды по названию

Популярные бренды