Shop fox SHOP FOX W1747, Руководство пользователя

Страница: 39 / 56

-37-
W1747 20" Planer
SE
RV
IC
E
Pulley Alignment
Proper pulley alignment (see
Figure 35
) prevents pre-
mature belt wear. The pulleys are properly aligned when
they are parallel and in the same plane as each other.
Use a straightedge on the edge of the pulleys to judge
alignment.
Should you find that the pulleys are out of alignment,
do these steps:
1.
DISCONNECT THE PLANER FROM THE POWER
SOURCE!
2.
Remove the motor access panel, the V-belt cover,
and loosen the belt tension (
Page 24
).
3.
Using a 12mm wrench, loosen the motor mount fas-
teners shown in
Figure 36
just enough to allow the
motor to be repositioned.
4.
Slide the motor as required to align the pulleys.
5.
Re-tighten the motor mount fasteners carefully to
assure that the tightening process does not move
the motor.
6.
Re-tension the V-belts.
7.
Replace the belt cover and motor access panel.
Figure 35
. Checking belt alignment.
Figure 36
. Motor mount fasteners.
OFF