17
18
Parts List
These optional parts are available for repair or
replacement.
To replace the parts, read the instruction manual
that comes packed with the parts.
●V-470 Visor/Peak
●Visor/Peak screw
●Mouth Piece
●Mouth Piece Filter
●Mud Guard
●Center Pad
●Cheek Pad (right and left)
●Chinstrap Cover
●Neck Outlet
E n g l i s h
1.
Before wearing the helmet, make sure that
visor/peak’s screws are securely tightened. A
visor/peak coming loose while riding can be
dangerous.
2.
Be sure to always wear the center pad, cheek
pads, and chistrap covers when using the
helmet.
3. Clean and care the helmet and the parts with
a solution of neutral detergent and water,
rinse well and dry with a soft cloth.
Never use
any of the following materials: hot water
over 40 ℃; salt water; any acidic or alkali
detergent; benzine, thinner, gasoline, or
other organic solvents; glass cleaner; or
any cleaner containing organic solvents. If
any of these cleaners are used, the
helmet’s chemical nature may be altered
and safety may be hindered.
*
If insects become stuck to the helmet during
riding and are left in place, the helmet surface
may be corroded. They should be removed
promptly.
*
Be sure to use SHOEI genuine parts when
replacing the visor/peak or interior parts.
WARNING
Bitte erst lesen
Überprüfung des
Packungsinhaltes
Teilebeschreibung
Anbringung des Schirms
Entfernen und Anbringen
der Nasenabdeckung
Anbringen des
Schlammschutzes
Abnehmen und Anbringen
des Halsauslasses
Austausch der inneren Teile
Entfernen der inneren Teile
Anbringen der inneren Teile
Wichtige Hinweise zum
Umgang mit den Polstern
M.E.D.S.
(Motion Energy Distribution System;
Bewegungsenergieverteilungssystem)
E.Q.R.S.
(Emergency Quick Release System)
WARNUNG
Teileliste
Informazioni generali
Verificare gli elementi
contenuti nella confezione
Descrizione delle parti
Installazione della punta
Rimozione e installazione
del paranaso
Installazione della
protezione fango
Rimozione e installazione
dell’uscita al collo
Sostituzione dei componenti
interni
Rimozione dei componenti interni
Installazione dei componenti interni
Remarque importante concernant la
manipulation des parties intérieures
M.E.D.S.
(Sistema di distribuzione dell’energia cinetica)
E.Q.R.S.
(Emergency Quick Release System)
AVVERTENZA
Elenco delle parti
D e u t s c h
I t a l i a n o
19
20
21
22
23
24
24
25
26
27
-
29
30
31
32
33
33
Find out more about helmets we have.