5
1. Nose Cover
2. Lower Air Intake
3. Mud Guard
4. Front Air Intake
5. V-470 Visor/Peak
6. Upper Air Intake
7. Shell
8. Top Air Outlet
9. Rear Air Outlet
10. Neck Outlet
11. Side Outlet
6
Nose Cover (Lower Air Intake)
/
Side Outlet
Front Air Intake
Rear Air Outlet
/
Neck Outlet
E n g l i s h
Installing the Visor/Peak
Parts Description
E n g l i s h
Upper Air Intake
/
Top Air Outlet
Visor/Peak Screw
Anti-reflection Sticker
To install the visor/peak, use the enclosed
visor/peak screws. Tighten the center screw first,
and do right and left screws. The angle of the
visor/peak can be adjusted by loosening the
center screw. But when adjusting the angle lower
from the highest position, remove the center
screw, and after adjusting the angle, fix the center
screw. Make sure to secure your view when
adjusting the angle. Check all screws once more
to ensure they are securely snug.
NEVER USE
ANY SCREW EXCEPT FOR ORIGINAL SHOEI
VISOR/PEAK SCREWS TO PREVENT DAMAGE
TO THE THREADED INSERTS.
The visor/peak could shatter under pressure or
due to an impact. Suitable goggles are
recommended for extra eye protection.
Affix the enclosed anti-reflection sticker on the
inner surface of the visor/peak to be positioned
symmetric reffering to the cut positions of the
sticker and the grooves of the visor/peak as per
Drawing.
*Anti-reflection sticker is not enclosed with black
plain colored model.
5
7
4
2
1
3
9
10
11
6
8
English