11
12
E n g l i s h
R
D
L
G
Chinstrap
Cover
Snap
A
B
C
Chinstrap
Plate Bracket
A-1
9
10
11
12
Snap
Clic
Center Pad Bracket
7
D
Boss
Installing Interior Parts
●
Installing the Chinstrap Covers
The chinstrap covers have different shapes on the
right and left sides of the helmet. Referring to the
drawing, identify the right and left sides. Pass the
chinstrap through the cover and fasten the snap
until it clicks in place.
●
Installing the Center Pad
Insert the front plate between gaps of the bracket in
the order of A, B, C to be fixed as per Drawing 8.
Roll up the center part of window beading (Drawing
A-1), then slide in the A part of the front plate
between the gaps of bracket (the areas indicated
by arrows of Drawing A-1) as per Drawing A-2.
Slide in the B part of the front plate between the
gaps of the bracket while pushing the boss
(Drawing B-1 and B-2). Referring to the areas
indicated by arrows of Drawing C-1, slide in the C part of the front
plate between the gaps of the bracket (Drawing C-2). Fix the other
side of the plate in the same manner.
After fixing the front plate, insert the center part of the window
beading into the air intake as per Drawing D.
Snap the 2 snaps in the rear of the center pad into the positions
until they click as per Drawing 9.
Englis
h
8
Cheek Pad Bracket
Cheek Pad Bracket
Right
Plate (B)
Plate (A)
E n g l i s h
●
Installing the Cheek Pads
Before installing the cheek pads, make sure that
the 3 hooks are positioned as per Drawing 10.
They may not be hooked if they are not
positioned properly.
Identify a right and a left pad. Insert the plate (B)
into a boss of a cheek pad braket at the rear of
the helmet and slide it to forward (Drawing 11).
Insert the plate (A) into a boss of a cheek pad
bracket as per Drawing 12.
A-2
B-1
B-2
Bracket
Support
Bracket
C-1
C-2
Boss