Damaged dust bag or dust drawer seals will allow the escape of
combustible materials causing a fire hazard around the machine.
Check damaged parts. Before further use of a tool, guard or other
part that is damaged, check carefully to determine that it will operate
properly and perform its intended function. Check for mounting or
any other condition that may affect its operation. A tool, guard or
other part that is harmfully damaged should be properly repaired or
replaced.
If the electrical cord, plug or wiring should become frayed or
damaged, replace it at once.
Replace all doors before operating the machine.
Do not operate machine with sander housing door open.
After making adjustments, remove all wrenches and other tools before
operating the Finisher.
Use extra caution when starting the Finisher for the first time after
installing a new tool or part.
MONTHLY MAINTENANCE
1.
Check the felt and rubber sanding pulleys surface for any accumulation of dust.
Clean if necessary. Replace the wheel if worn.
2.
V-Belts – Check tension and adjust if necessary.
3.
Check and clean the sole trimmer and top lift trimmer insuring proper operation
and adjustments.
4.
Check for proper opening and closing of all dust dampers, removing and cleaning
any accumulation around the openings.
13
