Shively Labs 6017 Скачать руководство пользователя страница 7

Страница: 7 / 33

Preparing for Installation

1 Preparing for Installation

Receiving

As soon as you receive your antenna, BEFORE signing for the ship-

ment:
a. Check to be sure all the material has arrived.

NOTE

The box number and the total number of boxes are marked on

each box; for example, “Box 2 of 5” means “box number 2 of a

total of five boxes.”

b. Check for evident damage to any of the boxes.
c. If any boxes are missing, or if any are obviously damaged, describe

the problem in a WRITTEN note on the shipping papers BEFORE

signing them. Then call Shively right away, and we’ll do everything

we can to correct the situation.

Important!

Never store the antenna system outdoors, boxed or otherwise.

Take pains to keep the antenna components dry. You will need to

purge moisture from the interior of the antenna components

before applying transmitter power, and purging will be much more

time-consuming if the components get wet.

Unpacking

a. Find Box 1; it is marked “Open This Box First.” It contains the trans-

former and two copies of the installation drawing. The parts list on

one sheet of the installation drawing shows what box each item is in.

b. Then open the boxes and examine for shipping damages. File any

necessary claims with the carrier immediately.

c. If all the boxes are present and in good condition but material seems

to be missing, please contact Shively Labs immediately, using the

telephone or Fax number on the inside cover of this manual. For the

best service, have our shop order number (S/O) handy; it's in the

block at the bottom right corner of the installation drawing.

d. Along with your antenna you will get a spare parts kit. Place this in a

safe place until it is needed.

CAUTION

All contact surfaces and openings to the interior of the compo-

nents are protected from contamination and from physical dam-

age by caps and plastic bags. Do not remove this protection until

ready to connect the components.

Содержание 6017


































Результаты поиска

Содержание 6017

Отзывы:

Похожие инструкции для 6017

Бренды по названию

Популярные бренды

Shively Labs 6017, Инструкция по эксплуатации

Результаты поиска

Содержание 6017

Отзывы:

Похожие инструкции для 6017

Бренды по названию

Популярные бренды