4
Installing the Mounts
Figure 1
is a top view showing how the radiator mount pieces fit
together. Assemble and install the radiator mounts according to
Figure
1
, your installation drawing, and the following guidelines:
a. Find the marked locations on the mounting pole where the radiator
mounts will be located.
b. To ensure good electrical contact between the mounts and the sup-
port pole, scrape the pole paint away at the mount locations.
c. Install the mounts as shown in
Figure 1
and your installation draw-
ing.
d. When all mounts are in place, sight along them vertically to make
sure they are aligned before tightening them.
e. Repaint the pole where you removed the paint in step b.
Installing the 4-Way
Power Divider
Mounts on the Pole
Assemble and install the 4-way power divider mounts according to
Fig-
ure 2
on page 5, your installation drawing, and the following guide-
lines:
a. Find the marked locations on the mounting pole where the power
divider mounts will be located.
b. Referring to the installation drawing, mark the locations of the power
divider mounts (generally there will be either two or four mounts per
power divider).
CAUTION
If you don't get good electrical contact between the mounts and
the pole, the antenna may not perform as designed, and may pro-
duce stray signals that will interfere with other services on the
tower.
c. To ensure good electrical contact between the mounts and the sup-
port pole, scrape the pole paint away at the power divider mount
locations.
d. Use band clamps to attach the power divider mounts loosely to the
pole.
e. When all mounts are in place, sight along them vertically to make
sure they are aligned before tightening them.
f. Repaint the pole where you removed the paint in step c.
