Shively Labs 6017 Скачать руководство пользователя страница 2

Страница: 2 / 33

Congratulations!

Thank you for purchasing one of the finest FM broadcast antennas on

the market today. The Shively Labs 6017 antenna is widely recognized

as the top-of-the-line in its class for its superior performance and dura-

bility.
Your purchase is backed by the best technical support in the industry.

Shively is a leading manufacturer in the broadcast industry, providing

an extensive range of antennas, transmission line and components.

Our technical staff has a wealth of experience in the broadcast indus-

try and is standing by to serve you in any way.
This manual is intended to give you a good basic understanding of your

antenna: its proper and safe installation, startup, and operation, and

troubleshooting and maintenance information to keep it working satis-

factorily for years to come.

Please have everyone involved with the

antenna read this manual carefully, and keep it handy for future refer-

ence.

Meanwhile, please feel free to contact your sales representative at

Shively Labs at any time if you need information or help. Call or write:

Publication No. IM017 (100201)

Содержание 6017


































Результаты поиска

Содержание 6017

Отзывы:

Похожие инструкции для 6017

Бренды по названию

Популярные бренды

Shively Labs 6017, Инструкция по эксплуатации

Результаты поиска

Содержание 6017

Отзывы:

Похожие инструкции для 6017

Бренды по названию

Популярные бренды