◆
Notes on use
Do not use this unit for purposes other than skin analysis.
This unit is precision equipment. Do not drop or knock it against other objects.
If this unit is subjected to any strong shocks, it may result in malfunction.
Do not place or use in a location where it will be exposed to grime or dust.
They may get inside the sensor and damage the unit.
Only use the included lithium-ion rechargeable batteries, and set them in the
correct direction. Failure to do so may cause overheating, fire and damage.
When used for an extended period of time, Sensor may feel warm. This will
not affect performance or quality. If it feels unusually hot, turn off the power
and then remove the batteries.
Remove the batteries when the unit is not in use for a long time to avoid
leakage and loose connection.
If the unit has not been used for a long time, the battery may lose power
through self-discharge. Change it or charge before use.
Do not place on an unstable surface. Dropping may result in an accident or
injury.
A rapid change in temperature may cause condensation. If condensation
occurs, do not use the unit immediately. Wait until it is dry before use.
Do not use near a cell phone or a microwave treatment device. It may not
function properly due to magnetism.
When attaching a strap, use a durable one to prevent dropping the unit.
Dropping may damage the unit.
Do not use the USB cable for devices other than the specified device. It may
result in damage or malfunction.
◆
Cleaning instructions
Remove Rechargeable batteries.
Do not clean with solvent such as benzene or paint thinner.
Use a dry cloth to wipe the display screen.
Do not clean the interior of the camera inside the tip of Sensor. It may damage
the lens or the light, and result in malfunction.
◆
About wireless LAN (IEEE802.11a,
