Shinybow USA SB-5688CAK, Инструкция по эксплуатации

Страница: 8 / 32

6
FRONT PANEL- AUX
10. FUNCTION KEY - AUX (The audio additional on the “ Audio / ARC” Port ):
The AUX FUNCTION feature allows you to replace the embedded HDMI audio signal
with an audio signal that is connected to the switchers Audio AUX Input. Using the AUX
function, this replaces the audio and does not mix the audio. (Default = AUX Disabled)
To enable the AUX option on a specific Output, perform the following steps:
- Press the
AUX
button.
- On the Source row, press
1 THRU 8
(the buttons will illuminate).
- Press
ENTER
. The new configuration will be stored.
The front panel LCD display will show an “X” under the Source port.
- Or press
AUX
again to cancel the operation.
To disable the AUX option on a specific Output, perform the following steps:
- Press the
AUX
button.
- On the Source row, press
1 THRU 8
(the buttons will illuminate).
- Press
ENTER
. The pre-set configuration will execute.
The front panel LCD display will be blank under the Output port indicating the audio source is not embedded on the HDMI cable.
- Or press
AUX
again to cancel the operation.
Note:
1. Operation will abort if no keys are pressed within 5 seconds.
2. The AUX Audio input only functions when a valid HDMI / DVI video signal is present. Without video, the AUX audio will not operate.
FRONT PANEL-AUX