Shinybow USA SB-5688CAK, Инструкция по эксплуатации

Страница: 20 / 32

EDID FUNCTION FOR HDMI MATRIX SWITCHER
EDID SETUP To Change The EDID Setup
Step 1.
Press the
EDID
button
The display will show the currently selected EDID mode.
Step 2. Press SOURCE #1 OR #2 button row The button will flash blue and the display will show the current
Embedded EDID
Status.
Step 3. Press the ENTER button
To set EDID mode. The switcher will return to operation mode.
Operation will abort if no keys are pressed within 5 seconds.
EMBEDDED EDID MODES Total 7 EDID Modes
Embedded EDID Setup
Press
EDID > SOURCE > ENTER
SOURCE #1 or SOURCE #2
To select Embedded EDID mode or LEARNING mode.
Repeatedly pressing the
SOURCE 1
button will cycle up thru the options.
Repeatedly pressing the SOURCE 2 button will cycle down thru the options.
Embedded EDID:
Mode 1 : FSS
®
Mode 5 : H36-3D-M
Mode 2 : H24-3D Mode 6 : 4K2K
Mode 3 : H24-3D-M Mode 7 : DVI-D 1920x1200-60Hz
Mode 4 : H36-3D
EDID FUNCTION FOR HDMI MATRIX SWITCHER
RESET EDID Return To Factory Default
How to RESET EDID mode
Press
EDID > RECALL > ENTER
To RESET to FACTORY DEFAULT (1080p-2CH).
Press
EDID button: The LCM will show the current EDID status.
Press RECALL button: The LCM will show the RESET EDID .
Press ENTER to confirm entries.
The EDID will return to FSS
®
mode and resolution 1080p-2CH.
EDID STATUS To View The Current EDID Status
Step 1. Press EDID button
The button will flash blue and the display will show the current Embedded EDID Status.
Step 2. Press EDID button
To exit.
HOW TO SETUP FSS
®
FUNCTION Fast Speed Start
®
Step 1. Press the DESTINATION #1~8 button row
Then Press the SOURCE #1~8 button row
To setup and Install all devices.
Step 2. Press
EDID
button
Select a optimum status of Embedded EDID mode.
Step 3. Press
ENTER
button
To confirm entries.
Step 4. Press
EDID
button
To select the EDID FSS
®
mode.
Step 5.
Press
ENTER
button
To confirm entries.
18
EDID FUNCTION