Shinybow USA SB-5688CAK, Инструкция по эксплуатации

Страница: 7 / 32

5
FRONT PANEL-ARC
9. FUNCTION KEY - ARC:
Audio Return Channel (ARC) is a feature that sends audio from the TV back down the
HDMI cable to its source device, in this case, the switcher. Not all displays support ARC,
check your Users Guide for additional information. (Default = ARC Disabled)
The “Audio & ARC” port can support audio from either of (3) sources.
If the Input Video/Audio Source is HDMI, the audio can be extracted from the embedded signal.
If the Input Audio Source is connected to the external Audio Input, this same audio will be present on the Audio & ARC jack.
If ARC is selected, the audio will be from the destination device (
ex: TV).
To enable the ARC option on a specific Output, perform the following steps:
- Press the ARC button.
- On the Destination row, Press 1 THRU 8 (the buttons will illuminate).
- Press the ENTER button. The new configuration will be stored.
The front panel LCD display will now show an “A“ under the Output port.
- Or press ARC again to cancel the operation.
To disable the ARC option on a specific Output, perform the following steps:
- Press the ARC button
- On the Destination row, press 1 THRU 8 (the buttons will illuminate).
- Press ENTER . The pre-set configuration will execute.
The front panel LCD display will be blank under the Output port.
- Or press ARC again to cancel the operation.
Note:
1. Operation will abort if no keys are pressed within 5 seconds.
2. The AUX Audio input only functions when a valid HDMI / DVI video signal is present. Without video, the AUX audio will not operate.
FRONT PANEL-ARC