㵪
53
㵪
(3)
㧔
Scaling
㧕
Changes the input of VOLT, TC and RTD into a quantity.
Setting the unit is possible.(See 7.1.3 on page 63.)
Example)
When setting the voltage of 0 to 40 mV and scale of 000.00 to 100.00 for Channel 1
Press the MENU key for 3 seconds or more to enter
the setup mode. Use the
䂦
key to indicate "
". Press the
㵰
ENT
㵱
key.
Use the
䂦
key to select the channel you want to set.
Press the
㵰
ENT
㵱
key.
Use the
䂦
key to select "
".
Press the
㵰
ENT
㵱
key.
Use the
䂦
key to select "
".
Press the
㵰
ENT
㵱
key.
If
, or
is selected here, temperature
Input scaling is possible.
Use the
䂦
key to select a range(50 mV).
Press the
㵰
ENT
㵱
key.
Use the
䂦
key to select a numeral.
Use the key to shift a digit. Press the
㵰
ENT
㵱
key.
Use the
䂦
key to select a numeral.
Use the key to shift a digit. Press the
㵰
ENT
㵱
key.
䌛
Note
䌝
In the case of TC and RTD input, set the Span input value equal to the Span-side scale value.
But, set a decimal point position to the standard position. (
䋪
2:next page)
䌛
Note
䌝
In the case of TC and RTD input, set the Zero input value equal to the Zero-side scale value.
But, set a decimal point position to the standard position. (
䋪
1:next page)
FEED
ENT
Display
Operation Keys
Description
䋨
Span input value
䋩
MENU
ESC
3 sec
ENT
ENT
ENT
ENT
ENT
FEED
ENT
䋨
Zero input value
䋩
i
i
Tel: (01943) 602001 Fax: (01943) 816796