Shini SG-23 Series, Руководство пользователя

Страница: 28 / 47

28(47)
4.2 Startup and Shutdown
The startup and shutdown of SG-23/30 series are controlled by the start switch
and stop switch on control panel.
Picture 4-1: Startup and shutdown
If there are still materials which have not been granulated in feed box
and cutting chamber, the machine should not be shut down. Otherwise,
the materials left inside will block the blade rest shaft and make the motor
overloaded and trip when restarting.
4.3 Open the Feed Box, Screen and the Storage box
For SG-23/30 series, it
’
s necessary to turn off the main power before
opening the feed box, screen and storage box.
Caution!
The blade is very sharp; it may cause personal injury.
Caution!
Be careful when closing feed box, screen bracket and storage box to
prevent them from crushing.
Clean internal surface before closing feed box, screen bracket and
storage box.