Shini SG-23 Series, Руководство пользователя

Страница: 43 / 47

43(47)
block up with screws.
5) Lock the bearing cover well and put bolts into key grooves.
6) Set the big belt pulley on the shaft and install the locing ring. And then tighten
the locking ring after using dial gauge to adjust the big belt pulley.
7) Install the motor and position-adjusting plate on motor fixing plate (don
’
t
tighten them up)
8) Use level ruller to adjust the level of large and small pulley and then lock it
tightly.
Picture 6-14: Installation of bearing, motor, belt Plley and belt
6.6
Installation of Screen, Screen Bracket and Storage box.
1) Put the screen into screen bracket.
2) Hold up the screen bracket and hang its back pothook to the two side fixing
plates of the end plate.
3) Hold up the screen bracket to a proper position which match with the bearing
block. Then, tighten up the star screws.
4) Insert the storage box into the grooves at the two sides of end plate.
5) Install the safety switch.
Picture 6-15: Installation of screen, screen bracket and storage box