Shini SAL-330, Руководство пользователя

Страница: 25 / 40

25(40)
5. Installation and Debugging
Make a careful study of this chapter before installation.
The machine must be installed according to the steps below. Power
supply should be connected by qualified electricians.
5.1 Installation of SAL-330 / 360
5.1.1 Installation Methods of SAL-330 / 360
Picture 5-1
：
Installation methods of SAL-330/360
Notes for Installation and Positioning:
1) Machine just can be mounted in vertical position. Make sure there
’ s no
pipe, fixed structure or other objects above the installing location and around
the machine which may block machine
’ s installation, hit objects or injure
human person.
2) For easy maintenance, it ’ s suggested to leave 1m space around the machine.
3) Machine should be placed on water-level surface. If it needs to be mounted
on a higher surface (e.g. the scaffold or the interlayer), should ensure its
structure and size could bear the weight and size of the machine.
Machine Installation
Install the whole suction machine (SAL-330 / 360) onto the hopper dryer (see
the picture above), fix the four fixation holes in the mounting base. Connect one