Shini SAL-330, Руководство пользователя

Страница: 35 / 40

35(40)
6.2.3 Parameter List
Code Status
Default
Value Adjusting
Range
Mode
F2
Necessary spray washing times every
several times for operation
3times 1~10 times C2
F3
Necessary cleaning times for reverse
running every several times of operation
3 times 1~10 times C3
F4 Motor reverse running time 10sec 5~30 sec C3
F5 Alarm detecting time 20 sec 10~40 sec C1,C2,C3,C4
F6 Awaits motor to stop time 30 sec 30~99 sec C3
F7 Purge times 2 times 1~5 times C2
F8 Loading latency time 0 0~99 times C1,C2,C3,C4
6.2.4 Other Settings
1. Any setting before power on will be saved automatically and back to shut off
state after 5 second of no operation.
2. Any setting after power on will be saved automatically and back to standby
state after 5 second of no operation.
3. No material shortage signal is being detected even after all action is over,
then if press key for 3 second ， motor will perform reverse running action,
when release the keys to stop motor and await the motor stop count
down and back to standby state to detect material shortage signal. (The
function only suitable for SAL-430/460 model)
4. Function of the jumper: functions of C1, C3 and C4 will be activated when
jumping out which is applicable to SAL-700G / 800G / 430 / 460. When
disconnected, only functions of C1, C2 and C4 are available which can be
used for SAL-700G / 800G / 330 / 360.