Shindaiwa Shindaiwa SBA-TX24, Руководство владельца/оператора

Страница: 11 / 48

11
General Maintenance
Daily Maintenance
Short Term Storage
Long Term Storage
50-Hour Maintenance
WARNING!
Before performing any mainte-
nance, repair, or cleaning work on the
unit, make sure the engine and cutting
attachments are completely stopped.
Disconnect the spark plug wire before
performing service or maintenance work.
New Grease
Gear Shaft Collar
Old Grease
WARNING!
Non-standard accessories,
cutting attachments, or replacement
parts may not operate properly with
your unit and may cause damage and
lead to personal injury.
IMPORTANT!
For detailed maintenance information about
your Shindaiwa Multipurpose Engine, con-
sult the owner’s manual that was provided
with it. If it has been misplaced, contact
Shindaiwa for a replacement.
Prior to each work day, perform
the following:
n
Clean any debris or dirt from the cutting
attachment.
(more frequently in dusty or
dirty conditions):
n
�emove the cutting attachment and the
gear shaft collar, and press new grease
into the gear case until the old grease
has been pushed out. Use only lithium-
base grease such as Shindaiwa Gear
Case Lubricant or equivalent.
(Less than 30 days)
n
Clean debris from gearcase and outer
tube exterior surfaces.
Whenever the unit will not be
used for 30 days or longer, use
the following procedures to pre-
pare it for storage:
n
Check for loose or missing screws or
components. Make sure the cutting at-
tachment is securely fastened.
n
Make sure nuts, bolts, and screws are
tight.
n
Lubricate gearcase as outlined in this
manual.
n
Clean external parts thoroughly and
apply a light coating of oil to all metal
surfaces.
n
Before storing the unit, repair or replace
any worn or damaged parts.
n
Store the unit in a clean, dust-free area.
n
Lubricate gearcase.
n
Cover the blade with the blade cover.