Shindaiwa M2510/EVC, Руководство владельца/оператора

Страница: 4 / 60

Product Description
M2510 Multipurpose Tool Carrier
Outer Tube
Grip
Handle
Throttle Trigger
Throttle
Interlock
Ignition Switch
Coupler
Spark Plug
Air cleaner
Fuel tank
Tank guard
Coupler Screw Knob
Latch
Latch protector
4
Using the accompanying
illustration as a guide,
familiarize yourself with this
unit and its various components.
Understanding your unit helps
ensure top performance, long
service life and safer operation.
WARNING!
Do not make unauthorized
PRGL¿FDWLRQVRUDOWHUDWLRQVWRDQ\RI
these units or their components.
6SHFLÀFDWLRQV
Engine model SF2510E
Dr y weight (Including attachments) 4.5 kg / 9.9 lb.
Engine type 4-cycle, vertical cylinder, air cooled
Bore x stroke 34 x 27 mm / 1.3 x 1.1 in.
Displacement 24.5 cc / 1.5 cu. in.
Maximum power 1.1 HP/0.8 kW @ 7500 rpm (min-1)
Recommended idle speed 3,000 (±250) min
-1
(rpm)
Fuel/oil ratio 50:1 with ISO-L-EGD or JASO FC class 2-cycle mixing oil*
Carburetor type Walbro WYL, diaphragm-type
Fuel tank capacity 590 ml / 20.0 oz.
Ignition One-piece electronic, program contolled
Spark plug* NGK CMR5H
Electrode Gap 0.6 - 0.7 mm / .024 -.028 in.
Torque 100-150 kg cm / 9.8 - 14.7 N∙m
Air cleaner type Foam pre-filter; sealed felt main filter
Starting method Recoil
Stopping method Slide switch
Transmission type Automatic, centrifugal clutch w/bevel gear
EPA Emission Compliance Period** Category A
** The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operating
hours for which the engine has been shown to meet Federal emission requirements. Category C = 50 hours (Moderate), B = 125 hours
(Intermediate) and A = 300 hours (Extended).
* The NGK CMR5H also meets the requirements for electro magnetic compliance (EMC).
Specifications are subject to change without notice.