Shindaiwa M2510/EVC, Руководство владельца/оператора

Страница: 10 / 60

Adjust the shoulder strap so the shoulder
pad rests comfortably on the off-side shoul-
der and the cutting path of the cutting
attachment is parallel to the ground. Make
sure all hooks and adjustment devices are
secure.
Shoulder strap
NOTE:
Although a shoulder strap accessory is
not required for use with a grass unit,
a shoulder strap can increase opera-
tor comfort during extended periods of
operation.
10
Operation
NEVER operate the unit with the cutting
attachment shield or other protective
devices removed!
Use only authorized Shindaiwa parts and
accessories with your Shindaiwa unit. Do
not make modifications to this unit without
written approval from Shindaiwa, Inc.
ALWAYS make sure the cutting attach-
ment is properly installed and firmly
tightened before operation.
NEVER use a cracked or warped cutting
attachment: replace it with a serviceable one.
Checking Unit Condition
ALWAYS make sure the cutting attach-
ment fits properly into the appropriate
attachment holder. If a properly installed
attachment vibrates, replace the attachment
with new one and re-check.
ALWAYS stop the engine immediately
and check for damage if you strike a for-
eign object or if the unit becomes tangled.
Do not operate with broken or damaged
equipment.
NEVER allow the engine to run at high
RPM without a load. Doing so could dam-
age the engine.
NEVER operate a unit with worn or dam-
aged fasteners or attachment holders.
WARNING!
A cutting attachment shield or
other protective device is no guarantee
of protection against ricochet. YOU
MUST ALWAYS GUARD AGAINST
FLYING DEBRIS!