background image

11

Maintenance

WARNING!

Before performing any main-

tenance, repair, or cleaning work on 
the unit, make sure the engine and 
cutting attachment are completely 
stopped. Disconnect the spark plug 
wire before performing service or 
maintenance.

WARNING!

Non-standard accessories, 

cutting attachment, or replacement 
parts may not operate properly with 
your unit and may cause damage and 
lead to personal injury.

Prior to each work day, perform the 
following:

Remove all dirt and debris from the 

Ŷ

engine, check the cooling fins and 
air cleaner for clogging, and clean as 
necessary.

Clean any debris or dirt from the cut-

Ŷ

ting attachment.

Check the entire unit for leaking fuel or 

Ŷ

grease.

Check for loose or missing screws or 

Ŷ

components. Make sure the cutter 
attachment is securely fastened.

Make sure nuts, bolts, and screws 

Ŷ

(except carburetor idle speed adjusting 
screws) are tight.

Carefully remove any accumulations of 

Ŷ

dirt or debris from the muffler and fuel 
tank. Check cooling air intake area at 
base of crankcase. Remove all debris. 
Dirt build-up in these areas can lead to 
engine overheating, fire, or premature 
wear.

Daily maintenance

IMPORTANT!

MAINTENANCE, REPLACEMENT 
OR REPAIR OF EMISSION CONTROL 
DEVICES AND SYSTEMS MAY BE PER-
FORMED BY ANY REPAIR ESTABLISH-
MENT OR INDIVIDUAL; HOWEVER, 
WARRANTY REPAIRS MUST BE PER-
FORMED BY A DEALER OR SERVICE 
CENTER AUTHORIZED BY Shindaiwa 
INC. THE USE OF PARTS THAT ARE 
NOT EQUIVALENT IN PERFORMANCE 
AND DURABILITY TO AUTHORIZED 
PARTS MAY IMPAIR THE EFFECTIVE-
NESS OF THE EMISSION CONTROL 
SYSTEM AND MAY HAVE A BEARING 
ON THE OUTCOME OF A WARRANTY 
CLAIM.

Spark Plug

Keep the spark plug and wire connections 
tight and clean.

Fasteners

Make sure nuts, bolts, and screws (except 
carburetor adjusting screws) are tight.

Air Filter

The C4 engine that powers your Shindaiwa 
model is a hybrid 4-stroke engine. As a 
hybrid, the engine is lubricated by oil 
mixed with the gasoline and air from the 
carburetor that moves through and around 
the internal parts of the engine in a similar 
way that a 2-stroke engine is lubricated. 
Without the heavy duty 2-stage air filter 
equipped on all C4 engines, dust and 
dirt could also move through the engine, 
decreasing engine life, increasing valve 
wear and the need for more frequent valve 
adjustments. To keep your C4 engine 
strong and reliable, Shindaiwa recom-
mends that you check and service the air 
filter as instructed in the 10-Hour Mainte-

0XIÁHU

This unit must never be operated with a 
faulty or missing spark arrester or muf-
fler. Make sure the muffler is well secured 
and in good condition. A worn or damaged 
muffler is a fire hazard and may also cause 
hearing loss.

General maintenancel

NOTE:

Using non-standard replacement parts 
could invalidate your Shindaiwa warranty.

5HPRYHDOOGLUWDQGGHEULVIURPWKHHQJLQHFKHFNWKHFRROLQJ¿QVDQGDLUFOHDQHUIRU

clogging, and clean as necessary

&RROLQJ¿QV

Air

intake

&RROLQJ¿QV

Содержание M2510/EVC





























































Отзывы: