Shindaiwa DGW340DM, Руководство владельца и оператора

Страница: 6 / 52

- 3 -
Warning: Injury
 Do not operate the equipment with any doors or covers open. There is a danger of
hair, body parts and other items being caught up in moving parts such as cooling
fans and belts.
 Always be sure to stop the engine and remove the starter key before performing any
equipment check or maintenance.
 Do not modify the equipment and do not operate with parts removed.
 The lifting lug is designed to be used only for lifting the equipment. Do not lift the
equipment with any heavy items (such as a trailer, gas canister and additional fuel
tank) added to the equipment.
Warning: Injury to Eyes and Skin
 Use protective gear, such as rubber gloves, when inspecting or replacing the battery
due to the dilute sulfuric acid in the battery fluid. Be sure that fluid does not get into
eyes, or on skin or clothing.
 If battery fluid gets into the eyes, or on the skin or clothing, immediately wash with a
large amount of water, and always be especially sure to seek medical attention if it
gets into the eyes.
Warning: Explosion
 Do not operate the equipment or recharge the battery when the battery fluid level is
below the lower level.

Do not generate any sparks near the battery and do not allow any fire or other open
flame near the equipment because the battery generates ignitable gas.
Warning: Electromagnetic Interference
 Persons using a heart pacemaker are not allowed near the welder or welding work
area while welding is being performed without the permission of a doctor. The
welder generates a magnetic field while energized that negatively affects
pacemaker operation.
Caution: Suffocation from Exhaust Fume
 Do not direct the engine exhaust towards passersby, private homes or similar
persons/locations because the engine exhaust fume includes components that are
harmful to humans.
Caution: Electric Shock
 Do not sprinkle water on the equipment and do not use where exposed to rain.
 If wearing gloves, be sure to always wear gloves with dry insulation properties. Do
not wear gloves that are damaged or wet.
Caution: Burn
 The engine, muffler and similar parts are extremely hot during operation and
immediately after stopping the equipment. Never touch hot parts.
 Never open the radiator cap during operation or immediately after stopping the
equipment. Hot cooling water and steam will spurt out.
 Always be sure to stop the engine and allow it to cool before inspecting or changing
the engine oil. Opening the oil gauge or oil plug during operation will result in hot oil
spurting out.
 Always be sure to wear leather gloves, apron, shoe covers, arc-proof glasses (face
shield), safety shoes, hard hat and long-sleeve clothing to protect against the
scattering of weld spatter that occurs during welding.