Shindaiwa DGW340DM, Руководство владельца и оператора

Страница: 17 / 52

- 14 -
5-8. Error Code Display
The equipment includes an error code display
function that notifies the operator of any errors
during operation. If an error is detected during
operation, error codes are displayed by the DC
and AC meters. If this occurs, stop operation
immediately, and inspect and repair the
location where the error has occurred.
(Refer to section "13. Troubleshooting".)
•
E01 - - - Overheating (Welding power source)
•
E03 - - - Weld output short circuit
•
E06 - - - Overspeed (Engine)
•
E14 - - - Short circuit of automatic switching weld output
5-9. Frequency Selector
Warning: Injury
•
Do not operate the equipment with any doors or covers open. There is a danger of
hair, body parts and other items being caught up in moving parts such as cooling
fans and belts.
Caution: Burn
•
The engine, muffler and similar parts are extremely hot during operation and
immediately after stopping the equipment. Never touch hot parts.
Caution: Electric Shock
•
Turn the breaker "OFF" and stop the engine before changing the frequency.
This equipment can operate at either 50Hz or 60Hz.
Set the frequency selector located inside the left
door to change the frequency in accordance with
the devices using the equipment.
<Note>
•
The frequency lamp lights up on the side of the
corresponding set frequency.
•
Changing while using an AC power source may damage the switch.
5-10. Monitor Lamp
Warning: Injury
•
Do not operate the equipment with any doors or covers open. There is a danger of
hair, body parts and other items being caught up in moving parts such as cooling
fans and belts.
Caution: Burn
•
The engine, muffler and similar parts are extremely hot during operation and
immediately after stopping the equipment. Never touch hot parts.
•
Never open the radiator cap during operation or immediately after stopping the
equipment. Hot cooling water and steam will spurt out.
•
Always be sure to stop the engine and allow it to cool before inspecting or
changing the engine oil. Opening the oil gauge or oil plug during operation will
result in hot oil spurting out.
Error Code Display
Frequency
Selector
Switch
(Inside left door)