Shindaiwa DGW340DM, Руководство владельца и оператора

Страница: 34 / 52

- 31 -
Caution: Injury
•
Always be sure to turn off the power switches of all devices using the equipment
when turning on the equipment breaker. Leaving on the power switch of a device
using the equipment when the equipment breaker is turned on could result in the
sudden operation of the corresponding device.
•
Do not leave on the power switch of a device using the equipment and do not
connect a device to an AC output receptacle.
•
Make sure that the frequency of this equipment matches the frequency indicated
on the device used.
Caution: Physical and Secondary Damage
•
If using the equipment as a power source for medical equipment, you must check
with the medical equipment manufacturer, doctor and hospital before using the
equipment.
•
Make sure that the frequency of this equipment matches the frequency indicated
on the device used. An improper frequency can result in malfunction of the device
used.
<Note>
•
During operation, the three phase 200/220 V output voltage of the AC power
source is constantly displayed regardless of whether the breaker is set to "ON" or
"OFF".
1) Select the frequency with the frequency selector in accordance with the
devices using the equipment.
(Refer to section "5-9. Frequency Selector".)
2) Turn off the switch of the device used.
3) Start the engine. (Refer to section "7-1. Starting the Engine")
4) Check the frequency according to the frequency lamp.
5) Check that the breaker is "OFF".
6) Connect the power plug(s) of device(s) being used to the AC output
receptacle(s).
7) Close the output terminal cover and tighten the securing bolt(s).
8) Turn the breaker to "ON".
(1) Recovery from Overcurrent Breaker Operation (If a Breaker Operates)
Caution: Injury
•
Always be sure to turn off the power switches of all devices using the equipment
when turning on the equipment breaker. Leaving on the power s witch of a device
using the equipment when the equipment breaker s are turned on could result in
the sudden operation of the corresponding device.
Receptacle
1-Phase
100/110V
Output
Terminal
AC Meter
Breaker
Terminal Cover
3-Phase/
1-Phase
200/220V
Output
Terminal Frequency Lamp