- 23 -
10. Simultaneous Use of Welding and Generating
The circuit breakers (1-P, 3-P) react on the AC power supply circuit only. In the
simultaneous use of welding and generating, overload to the engine may occur. Refer to
the following table and limit the AC power use.
Limitation of AC Power Supply in the simultaneous use of welding and generating
Welding
Output
AC Power Output
Amperage
3-Phase
1-Phase
60A
7.0kVA
3.3kVA
120A
7.0kVA
3.3kVA
140A
6.4kVA
3.3kVA
170A
5.2kVA
3.3kVA
240A
2.0kVA
1.6kVA
300A
PLUS
0kVA
OR
0kVA
<Caution>
Eco mode is designed for welding only. The engine automatically moves to high
speed, in case it is used for AC Output.
11. Checking and Maintenance
Danger : Electric Shock
・
・
・
・
Injuries
Before performing any equipment check or maintenance, stop the engine, and
remove engine key. A person performing the maintenance must always keep
the key.
Caution: Fire
・
・
・
・
Burns
Keep the equipment far away from fire.
When checking engine, always stop the engine, and keep away from fire. Wait
until the engine cools down, before performing any inspection.
Do not open the radiator cap while operating this equipment or immediately
after stopping the equipment, to prevent burns from hot steam or water.
Do not open the side door during operation or immediately after stopping
the equipment, as some parts/components (flexible tube, resistors, etc.)
can reach extremely high temperature inside the equipment.
<Caution>
Authorized technicians should perform all checks and maintenance work, except
for the pre-startup checks.
Request for the maintenance item with
●
mark to our dealer or authorized
distributor.
Always use our genuine replacement parts.
When draining waste fluid from the equipment, catch it in a tray.
When disposing of oil, fuel, coolant (LLC), fuel filter, battery and /or other harmful
disposal, please follow the international/federal regulations.
Please do not dispose of harmful items or waste fluid to the ground or a river,
pond, or other water resources and help to keep our environment clean.
Содержание DGW300MS/UK
Страница 2: ......
Страница 32: ...30 14 Engine Wiring Diagram 30...
Страница 33: ...31 15 Generator Wiring Diagram...
Страница 34: ...32 2010...