37
(4) Drain water in the Water Sedimentor
When the Float (Red) is coming up to the Drain Line,
drain the water.
Turn the Fuel Lever to CLOSE.
Turn the ring nut counterclockwise and remove the Cup and Gauze Filter.
Dispose water or dirt.
When dirt is adhered to the Gauze Filter, clean the filter by compressed air.
Reinstall in the reverse order.
< Note >
Be sure to confirm that there is no dirt on O RING, when installing the cup.
Be sure to confirm that there is no fuel leakage from the water Sedimentor,
by turning the fuel lever to OPEN.
(5) Drain water in fuel filter
Turn the Fuel Lever to CLOSE.
Turn the Ring Nut counterclockwise and remove
Cup and Fuel Filter Element.
Remove the Fuel Filter by filter wrench.
Dispose water or dirt.
When dirt is adhered to the Fuel Filter Element, clean the filter by compressed air.
Reinstall in the reverse order.
< Note >
Be sure to confirm that there is no dirt on O RING, when installing the cup.
Be sure to confirm that there is no fuel leakage in the fuel line by running the
engine.
Be sure to wipe out the spilled fuel in the fuel line when removing the fuel
filter.
Fuel Filter Part No.
Kubota Part No.
15521 - 43161
Check
Startup
Clean
Every 200 hours
Drain
Every 200 hours
Change
Every 400 hours
1
2
2
1
3
4
3
4
OPEN
CLOSE
Fuel Lever
Ring Nut
Cup
Gauze Filter
Float(Red)
Drain Line
Cup
Fuel Filter
Element
CLOSE
OPEN
Fuel Lever
Ring Nut
CLOSE
Содержание DGA12DM
