36
Cleaner Cap
Air Cleaner
Clip
Cleaner Cap
Outer Element
Cleaner Cap
Valve
Inner Element
< Note >
If an oil filter wrench is not at hand, contact our authorized distributor or our engineering
section to replace.
Oil Filter Part No.
Kubota Part No.
16414-32432
(3) Cleaning / Changing Air Filter Element
Loosen the Air Cleaner Fixing Clip and remove the
Cleaner Cap.
Remove the Outer Element and the Inner
Element.
Clean or change the Outer Element and the Inner
Element and reinstall it in the reverse order.
< Note >
Be sure to set the Cleaner Cap at the arrow mark upside.
Clean the element more often
where the equipment is
used in dusty condition.
Never pour any oil into air cleaner as dry type element is used.
Open the vacuum valve to clean voluminous dust every week in clean place and every day
in dusty place. When dirt or water found in the cleaner, wipe it out with cloth.
Do not touch the element besides cleaning.
Element Part No.
Kubota Part No.
Outer Element
TA040-93231
Inner Element
TA040-93221
Clean Air Filter Element
<Dried contaminants adhered>
Blast the compressed air to Element from inside.
<Carbon and oil adhered>
Change to a new Filter.
Clog Indicator
The clog indicator to display clog in the Air Filter
Element is incorporated to air filter unit.
Whenever RED SIGNAL appears in the indicator
window, clean or change Element regardless of
operation hour.
After cleaning or changing finishes, push the reset
button to release the RED SIGNAL.
Clean
Every 100 hours
Change
Every 400 hours
2
3
1
Clog Indicator
Reset Button
Indicator Window
(RED SIGNAL)
Содержание DGA12DM
