Shindaiwa DG60MI, Руководство владельца и оператора

Страница: 42 / 52

39
Fuel Drain Plug
With Rubber Seal
Drain Cock
(Radiator)
Coolant Drain Hose
LOW
(Radiat
or)
FULL
(Radiat
or)
Sub Tank
(7) Draining Water from the Fuel Tank
Drain Water Every 200 hours
Set a container to catch spilled water.
Remove the fuel drain plug and packing (with rubber
seal).
After the water has been drained, reinsert the fuel
drain plug with new packing (with rubber seal).
< Note >

Replace the packing of the fuel drain plug with new packing each time the water is drained.

Packing part no.: V106-000110

After reinserting the fuel drain plug, be sure to always check that there is no fuel leakage.
(8) Coolant Replacement
Replace Every year or Every 1000 hours
Set a container to catch spilled coolant.
Remove the radiator plate.
Remove the radiator cap.
Loosen the drain cock of the radiator and
the drain plug of the engine.
After the coolant has been drained, reinsert
the coolant drain plug with new packing.
Remove the subtank and flush the coolant
from the subtank.
Reattach the subtank to its original position
and fill with coolant until it reaches the
FULL level.
Fill the radiator with coolant until it reaches
the filler neck.
Re-attach and tighten the radiator cap.
Attach the radiator plate.
< Note >
 Refer to section “
8-2. Checking Coolant
” for coolant
information.

After reinserting the coolant drain plug and shortly after
starting the engine, be sure to always check that there is
no coolant leakage.
10
9
8
7
6
5
4
3
2
1
3
2
1
Radiator Cap
Filler Neck
給水口
Radiator Plate
Drain Plug
(Engine)