Shindaiwa DG60MI, Руководство владельца и оператора

Страница: 29 / 52

26
Fuel
Inlet
Fuel Strainer
Fuel Cover
Tank Cap
(4) Replacing the Fan Belt
Request the authorized distributor where the generator was purchased to replace the
fan belt.
< Note >

Use of a loose or damaged fan belt could result in overheating or insufficient charging.

Do not operate the generator if fan guard has been removed.
8-4. Checking the Fuel
CAUTION : FIRE

This generator uses diesel fuel. Always be sure to stop the engine and not
bring flames close when inspecting fuel or refueling. Wait until the engine has
cooled before performing such procedures.
Check if there is a sufficient amount of fuel and add fuel if insufficient. The engine fuel
level on the controller will only display the fuel level for the internal fuel tank.
Be sure to close the cap tightly after refueling.
< Note >

Use Diesel fuel, ASTM D975 No.2-D in the event ambient
temperature reaches down to
–5 °C.

The fuel supply pump, injectors and other parts of the fuel
system and engine can be damaged if any fuel or fuel
additives are used other than those specifically
recommended by the engine manufacturer.

Always be sure to use the fuel strainer attached to the fuel inlet.

Carefully add fuel until the tank is full.

Always be sure to wipe up any spilled fuel.
8-5. Checking for Fuel, Oil and Coolant Leaks
CAUTION : FIRE

If fuel or oil is leaking, repair the leaking location before operating.
Open the check door and check for fuel, oil and coolant leakage from fuel piping
connections and similar locations.