Shindaiwa BCK-11, Инструкции по преобразованию

Страница: 3 / 12

3
Safety and Operation Information Labels: Make sure
all information labels are undamaged and readable.
Immediately replace damaged or missing information
labels. A new label is provided in this kit and additional
labels are available from your local authorized Shin-
daiwa dealer. Prior to installing the new label, Remove
old label and clean the outer tube with rubbing alcohol
or similar cleaner.
IMPORTANT!
Safety Labels
■
When operating with a blade, make sure the handle
is positioned to provide you with maximum protec-
tion from contacting the blade. Always make sure the
handlebar is installed in accordance with the manufac-
turers instruction.
■
NEVER use a cracked or warped blade: If a properly
installed blade vibrates, replace it with a new one and
re-check.
WARNING!
■
ALWAYS Shut off the engine immediately if a blade
binds in a cut. Push the branch or tree to ease the
bind and free the blade.
■
Beware of a coasting blade when brushcutting.
A coasting blade can injure while it continues to
spin after the throttle trigger is released or after the
engine is stopped.
Kit Contents
General Safety Instructions
# Description Qty
1. blade shield 1
2. shoulder strap w/hip pad 1
3. handlebar assembly 1
4. shield bracket 1
5. 5 mm nuts 4
6. 5 mm lock washers 4
7. 5 x 10 mm screws with captivated
flat and lock washers 3
8. 5 x 8 mm screws 2
9. upper handlebar cap 1
10. handlebar mounting bracket 1
11. lower handlebar cap 1
12. 5 x 25 mm hex socket head bolts 6
13. lower plate 1
14. adapter plate 1
15 10mm LH nut 1
16. harness hanger assembly 1
17. 5 x 12 mm screw 1
18. throttle cable clips 2
19. caution label 1
20. split pin 1
Assembly Tool (s)
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
2
20