![background image](http://html1.mh-extra.com/html/shindaiwa/305s/305s_owners-operators-manual_1257579012.webp)
12
Operation
Fuel and lubricant
Fuel is a mixture of regular grade petrol and an air-cooled 2-stroke engine oil.
Minimum 89 Octane unleaded petrol is recommended.
Do not use fuel containing methyl alcohol or more than 10 % of ethyl alcohol.
Recommended mixture ratio; 50 : 1 (
2 %
) for ISO-L-EGD Standard (ISO/CD13738),
JASO FC, FD grade and
shindaiwa
recommended oil.
- Never use two-stroke oil intended for water-cooled engines, motor-cycle engines.
- Do not mix directly in engine fuel tank.
- Avoid spilling petrol or oil.
Spilled fuel should always be wiped up.
- Handle petrol with care, it is highly inflammable.
- Always store fuel in approved container.
Chain lubricant
Proper lubrication of the chain while in operation minimizes friction between the chain,
the guide bar and sprocket and also clutch components such as needle bearing and
clutch assembly.
Use
shindaiwa
genuine chain oil or
shindaiwa
recommended chain oil specially
formulated for bars and chains for proper lubrication.
These oils contain tackifiers, anti-aging and anti-oxidizing agents.
Consult your
shindaiwa
dealer for the proper chain oil.
Never use waste or reclaimed oil to avoid various malfunctions on oil system, clutch
system, chain and guide bar.
Lubrication problems caused by the use of improper oil will void the warranty.
Especially, vegetable based chain oil quickly turns to resin and adheres to oil pump,
chain, guide bar, clutch needle bearing and clutch assembly.
It causes malfunctions and shorten product life.
Flush chain oil system with mineral or chemical based chain oil after use, if it is required to
use vegetable oil due to local / municipal rule or any other reason.
For a short time emergency operation, fresh SAE 10W-30 motor oil can be used.
Winter operation
1. Cylinder
cover
2. Plug
3. Cold weather "storage" position
4. Warm weather position
Use the plug to prevent carburettor troubles in winter.
Release the cylinder cover latch and remove the cylinder cover.
Remove the plug from warm weather position, and install into cold weather "storage" posi-
tion.
For operation above 5 ºC, return the plug to its original place.
CAUTION
Whenever opening up the fuel tank, always loosen the cap very slowly and wait for
the tank pressure to be equalized before removing the cap.
NOTE
The plug should be installed to the "storage" position when the outside air temperature
is 5 ºC or lower.
For operation above 5 ºC, return the plug of the cylinder cover to its original place.
Failing to do so will cause the engine to be overheated.
Содержание 305s
Страница 33: ...33 X750 327 660 1 2018 1Memorandum and back cover Memorandum...
Страница 67: ...33 X750 327 660 1 2018 1M morandum et verso M morandum...
Страница 101: ...33 X750 327 660 1 2018 1Notizen und R ckseite Notizen...
Страница 135: ...33 X750 327 660 1 2018 1Memorandum e quarta di copertina Memorandum...