1. You do not ring buzzers.
2. You ring the buzzer at the designated temperature in the process you specify.
3. You ring the buzzer after the designated process finishes.
Operating procedure
Display panel
(1) Enter into buzzer setting
More than 5 seconds
(2) Set the buzzer “0”and ”AL-0”.
(3) Save the setting.
Operating procedure
Display panel
(1) Enter into buzzer setting mode.
More than 5 seconds
(2) Enter into the buzzer setting
mode “AL-1”.
(3) Push the key of the process which
you want to ring the buzzer
The indicator
flashes.
(4) Input the temperature you want to
ring the buzzer.
For example 1275
℃
(5) Save the setting.
19
Hold1 Hold2
Temp.1
Temp.4
Temp.3
Temp.2
Step1 Step2 Step3 Step4
※
If you do not operate any
keys for 10 seconds, the
display turns back to show
the kiln temperature.
1. You do not ring buzzers.
＋
＋
More than 5 seconds
2 Buzzer
※
If you do not operate any
keys for 10 seconds, the
display turns back to show
the kiln temperature.
You can set buzzers in the following 3 ways.
Buzzer sounds for 20 seconds.
Note:
Once you set the buzzer, the
setting continues in the next
firing unless you change.
If buzzers are unnecessary,
please set back to “No buzzer
(AL-0)”.
2. You ring the buzzer at the designated temperature in the process you specify.
Go back to the buzzer setting mode and confirm the contents of
the display.
＋
[ AL-2 ]
[ AL-1 ]
[
AL-0 ]
Note:
If you set the buzzer during
hold, it often rings.
For example
Step2
shows flashing.
shows flashing.
When you want to confirm the buzzer you set.
2 Buzzer
Convenient functions of controller
6
