Shimpo DMT-01, Инструкция по эксплуатации

Страница: 2 / 30

〔
How to replace heating elements
〕
Maintenance 23
Assurance Provision 27
How to Dispose 27
Convenient Functions of Controller 18
Safety Precautions
Contents
1 6
2 7
3
4
8
5
1 Kiln Diagram ............................................... 6
2 Specification ............................................... 6
3 Attachments ................................................ 6
1 Timer .......................................................... 18
2 Buzzer ........................................................ 19
3 Lock ............................................................ 20
1 Variation of Programs ................................. 11
2 Convenience and Safety Functions ........... 11
1 Installation .................................................. 7
1. Installation .............................................. 7
2. Setup of Timer ........................................ 8
2 Trial Operation ........................................... 9
1 About Controller .......................................... 21
〔
Error Message
〕
........................................ 21
〔
When you want to make sure the content
of the program you set
〕
............................ 21
〔
When you want to make sure if the firing
mode is on or off
〕
.................................... 21
〔
Display panel does not light up
〕
.............. 22
〔
Buzzers do not sound
〕
............................. 22
2 Others .................................................... 22
〔
Power Failure
〕
.......................................... 22
< Simplified Chart of Controller Operation > ..... 24
< Examples of “Custom” Programs by Controller > .... 25
< Temperature Chart of Basic Programs > ....... 26
< Note for “Custom” Programs > ...................... 26
1 Firing by “Basic Programs” ......................... 12
1.
Variation and Contents of Basic Programs
...... 12
2. Firing by Basic programs ........................ 13
2 Firing by “Custom” Programs ..................... 14
1. About “Custom” Programs ...................... 14
2. How to Create “Custom” Programs ........ 14
3.
Saving “Custom Programs” into Controller Memory
.. 15
4. Firing by “Custom” Programs ................. 15
3 Firing by “Continuing Programs” ................ 16
1.
About Continuing Programs
....................... 16
2. How to Make Continuing Programs ........ 16
3. How to save of Continuing Programs ..... 17
4. Firing by Continuing Programs ............... 17
Installation
Troubleshooting 21
Functions of Controller
Firing of Controller
7
11
12
Instruction Manual for Compact Electric Kiln with Controller (DMT - 01)
Appendix
1
Kiln Diagram/Specification/Attachment 6
Before Firing
10
1 Precaution for Setting / Taking Pottery Out of Kiln .. 10