Operating procedure
Display panel
(1) Push after making
self-produced programs.
(2) Number the programs which you
register (preserve). Input any
numbers (1
～
20).
For example
(3)
Push again and fix it.
(4)
Saving finishes when buzzer sounds.
Operating procedure
Display panel
(1) Push “Start” key after making
programs (continuing of P.16).
The indicator lights up.
ー
During firing
ー
(2)
Firing finishes when the display
shows “End”.
(3) Push “Stop” key.
The indicator
lights off.
(4) Switch the power (breaker) off.
15
When you want to start firing by self-produced programs you make without saving.
When you want to start firing by self-produced programs that you saved.
4.Firing by “Self-produced programs”
3. Saving “Self-produced programs”
You can register 20 self-
produced programs. Number
the program number from 1
～
20.
2 Firing by “Self-produced” programs
Firing by controller
5
shows flashing.
Operating procedure
Display panel
(1) Push “Self-produced program”.
(2) Input the program number which
you saved.
For example
(3) Push “Start” key.
The indicator
lights up.
ー
During firing
ー
(4)
Firing finishes when the display
shows “End”.
(5) Push “Stop” key.
The indicator
lights off.
(6) Switch the power (breaker) off.
Self
Prog.
shows flashing.
shows flashing.
Do not touch the kiln during
firing.
Be sure to switch the power
off when you open the
door.
DANGER
DANGER
△
!
△
!
< Note for “Self-
produced programs” >
Please be sure to read
『
Before Firing
』
before
firing.
P.32
P.12
