50
Error messages on the cycle computer
Warnings
This disappears if the error is fixed.
SC-E8000
SC-E6010
List of warnings
Code
Display
preconditions
Operational restrictions
while warning is
displayed
Remedy
W010
Temperature of the
drive unit is higher
than it is during
times of normal
operation.
Power assistance may
be lower than usual.
Stop using the assist function until the temperature of
the drive unit drops.
If the situation does not improve, contact the place of
purchase.
W011
The traveling speed
cannot be detected.
The maximum speed up to
which power assistance is
provided may be lower than
usual.
Check that the speed sensor is properly installed.
If the situation does not improve, contact the place of
purchase.
W013
Initialization of
torque sensor was
not completed
successfully.
Power assistance may
be lower than usual.
Change the assist switch to the gear shifting switch, or
connect only one assist switch and turn on the power
again.
If the situation does not improve, contact the place of
purchase.
W032
An electronic
derailleur may have
been installed in
place of a
mechanical
derailleur.
Power assistance
provided in [WALK]
mode may be lower
than usual.
Reinstall the derailleur for which the system is
configured to support.
If the situation does not improve, contact the place of
purchase.
