Shimadzu B252KS, Инструкция по эксплуатации

Страница: 71 / 80

- 76 -
3.3.1 Basic Information
3.3.1.1 Connection
1) Disconnect the power to the balance.
2) Connect the AKB-301 cable to the KEY connector on the back of the
balance.
3) Turn on the power to the balance.
3.3.1.2 Overview of Use
1) To set numeric values Press a function keys after the number keys.
2) To check the set numeric values Press only a function key, not a
number key.
3) To return to the mass display Press the C key.
If numeric keys other than C are pressed, the symbol illuminates to
indicate that a number is being entered.
3.3.1.3 Summary of Function Keys
Function
Function key
When this key is pressed after
the numeric keys If this key is pressed while the
numeric keys are not pressed
*1
UPPER key *2 Sets value of
graphic display.
Displays value of
graphic display.
LOWER key *3 Sets value of
graphic display or sets
value.
Displays value of
graphic display or displays
value.
TARGET key *4 For target display, sets
value.
For target display, displays
value.
g/PCS key Recalculates the weight with
regard to the present load as the
input value (pieces) and saves. Switches gram-display unit and
displays in piece unit.
UNIT WEIGHT
key Stores the numeric values
entered as the unit weight. Displays the unit weight
presently stored.
RECALC key Nothing is done. When piece is displayed,
divides the present load by the
present displayed piece count to
recalculate the unit weight.
PRINT key *5 Outputs the input numerals. Outputs the displayed value.
TARE key *5 Sets Pretare value. Performs taring.
*1 When these values are displayed, the * and # symbols are illuminated on the
screen.
Pressing the C key returns these displays to the mass display.
These displays can be output (printed) with the PRINT key.
*2 This key functions only when a comparator is used in Group or Level mode.
is displayed for other modes.