Shimadzu B252KS Скачать руководство пользователя

Страница: 4 / 80

SAFETY PRECAUTIONS

To ensure safe and proper operation of the balance, observe the following precautions.

•

Do not use the balance in hazardous areas.
This includes areas where the balance is expose to dust or flammable gases and
liquids.

•

Use the AC adapter specified by Shimadzu.
To prevent electric shock, never disassemble the AC adapter.

The AC adapter is designed for indoor use. Do not use the AC adapter in exterior
environments or where it may be splashed by water.

Ensure that the power supply voltage meets the indicated range of the AC adapter.

•

Handle the balance carefully.
The balance is a precision instrument of solid design.

•

Do not connect peripheral devices other than those recommended by Shimadzu.

The balance may not operate properly if peripheral devices other than those

specified in this manual are used. The specifications for the RS-232C/AUX
connector are described in Section 3.2 "Personal Computer - RS-232C". Connect
the peripheral devices according to the methods described in this instruction
manual.

•

DO NOT disassemble the balance, accessories, or peripheral unit.

Содержание B252KS

















































































Результаты поиска

Содержание B252KS

Отзывы:

Похожие инструкции для B252KS

Бренды по названию

Популярные бренды

Shimadzu B252KS, Инструкция по эксплуатации

Результаты поиска

Содержание B252KS

Отзывы:

Похожие инструкции для B252KS

Бренды по названию

Популярные бренды