
8
2.3 STANDARD ACCESSORIES
Standard
Base
Version
Swivel
Base
Version
* Single-End Spanner 24mm is additionally included in the Carry Case Version.
UNPACKING AND ASSEMBLY
3.0 UNPACKING AND ASSEMBLY
When you purchase a complete set that consists of Drill Motor, and Drill Stand, the packing is divided into two
packages. One package includes Drill motor, Carriage Block, Feed Handle, and Tool-Bag. The other package includes
Column, Base, and Water Collection Ring.
Unpack them and assemble the components as per following instruction;
1. Open the package for Drill Motor and Carriage Block.
2. Take out the Feed Handle and the Tool-Bag.
3. Pull out the Drill Motor with Carriage Block, together with the inner box.
Unpack them from the inner box.
4. Check for any damage and contents of the Tool Bag carefully.
5. Unpack the other package for Column and Base. Water Collection Ring is packed in this package.
6. Check for any damage.
7. Loosen the Stopper-Knob by rotating it anticlockwise.
8. Attach Feed Handle to the Carriage Block.
9. Insert the Carriage Block with Drill Motor to the Column.
10. Do not remove the cap on the spindle thread until Core-Bit is attached.
The cap is for the protection of spindle thread.
Item Size
Qty.
Double-End Spanner
13 x 17mm
1
Single-End Spanner
32mm
1
Allen Key
4mm
1
Allen Key
6mm
1
Threaded Bolt
3/8"
1
Water Collection Ring
130mm
1
Wedge with Wire for core-removal
1
Tool Bag
1
Item Size
Qty.
Double-End Spanner
17 x 19mm
1
Single-End Spanner
32mm
1
Allen Key
4mm
1
Allen Key
6mm
1
Threaded Bolt
3/8"
1
Water Collection Ring
130mm
1
Wedge with Wire for core-removal
1
Tool Bag
1
CAUTION!
Warranty may not be applied for any damage that is found after start using
this equipment. It would be considered to be made by hit or drop.
CAUTION!
If the Stopper-Knob is tightened, it would damage the Top Cap of Column when the Carriage
Block is inserted into the Column.
WARNING!!
Do not pinch the electric cable between Rack Gear of the Column and the Carriage Block.
Содержание R1511
Страница 23: ...22 SCHEMATIC DRAWINGS WITH SPARE PARTS LISTS ...
Страница 25: ...24 SCHEMATIC DRAWINGS WITH SPARE PARTS LISTS ...