Shibuya R1511 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 32

Shibuya R1511 Скачать руководство пользователя страница 20

19

10.0 CLEANING

WARNING!!

Always disconnect machines from power supply before starting any maintenance, cleaning, and inspection.

Clean any dust and debris from vents. Keep the machine handles clean, dry and free of oil or grease. Use only mild
soap and a damp to clean the machine, since certain cleaning agents and solvents are harmful to plastics and other
insulated parts. Some of these include: gasoline, turpentine, lacquer, thinner, paint thinner, chlorinated cleaning
solvents, ammonia and household detergents containing ammonia.
Never use flammable or combustible solvents around machines.

WARNING!!

To reduce the risk of injury, electric shock, and damage to the machine, never immerse your machine in liquid
or allow a liquid to flow inside the machine.

Cleaning procedure is as per followings.

1)

Ensure that the machine is unplugged from power supply, before you start cleaning.

2)

Detach the Core-Bit from the machine, and then wash it with water.

3)

Wipe each portion of Drill Stand with a damp cloth.

4)

Wash away the concrete slurry stuck to the Leveling Bolts on Base.

5)

Wipe other portion with dry cloth.

DAILY INSPECTION

11.0 DAILY INSPECTION

Inspect the following portions before you start using the machine.

Parts to be
Inspected

How to inspect Condition Remedy Remarks

Name Plate /
Caution
Plate

Visual Inspection

Can not read / Peel Off

Replace with new one.

Plug

Visual Inspection

Broken

Replace with new one.

Cable Cord

Visual Inspection

Inner electric cable is exposed

Replace with new one.

Carriage
Block

Move the Carriage Block
by Feed Handle

Rickety / Abnormal Sound / Not
smoothly moved

Adjust the Carriage Block.

Ref. Page 13

Roller (R)

Visual Inspection after
taking the Carriage
Block out of the Column

Outer Diameter gets smaller
than 14mm

Replace with new ones.

Ref. Page 14

Roller (F)

Visual Inspection after
taking the Carriage
Block out of the Column

Outer Diameter gets smaller
than 14mm

Replace with new ones.

Ref. Page 13

Slide Plate

Visual Inspection after
taking the Carriage
Block out of the Column

Thickness is worn to less than
2mm

Replace with new ones.

Ref. Page 14

«
...
18
19
20
21
22
...
»

Содержание R1511

































Отзывы:

Нет отзывов