Section 9 Periodical inspections and service
52
4. Checking the fuel level and
replenishing the oil
Danger
●
Do not replenish the fuel with a cigarette in
the mouth or do not illuminate by an open fire.
●
After replenishing the fuel, tighten the fuel cap
positively and wipe away spilt fuel completely.
●
Never supply oil while the engine is running or
hot. Otherwise, a fire may be caused.
(1) Check the oil level on the fuel gauge. If the
oil level is low, remove the fuel cap on the
left side of the machine and replenish the
fuel from the filler port.
[Cautions for handling]
●
If the fuel in the tank is low, the fuel may be
exhausted when running on a slope. Supply
oil ahead of time.
●
When the external atmospheric temperature
is below –10
º
, use Special No.3 light oil.
Otherwise, the fuel may not flow.
5. Checking and changing oil at
each part
Danger
●
Never supply oil while the engine is running or
hot. Otherwise, a fire or burning may be
caused.
Caution
●
Do not change the oil immediately after the
engine stops. Otherwise, a fire or burning
may be caused.
①
Engine oil
Change the oil after the initial 50 hours of
operation and then every 100 hours thereafter.
Inspection
Pull out the dipstick gauge, wipe the gauge
cleanly, insert it again, and pull it out again and
check if the oil is between the upper and lower
limits on the gauge. If the oil is not enough,
replenish the oil to the specified level on the
dipstick gauge from the oil filler
port.
Shibaura Europe BV
All manuals and user guides at all-guides.com
