Section 4 Functions of operating components
28
④
Speed change lever and 4-wheel
drive lever (operated by left
hand)
●
Speed change lever
Low [L] or high [H] vehicle speed can be
selected. By pushing dow n the lever to
the front side, high speed can be
selected. The center position is neutral
[N]. By pushing dow n to the rear side,
low speed is selected. Keep the lever on
the low speed side in norm al operation
and use the high speed side only w hen
moving.
Change the speed after having stopped
the m achine.
●
4-w heel drive lever
Auto 4W D or full-time 4W D can be
changed over.
By m oving the lever to the position A, full
time 4W D is selected and at the position
B, auto 4W D is selected.
⑤
Implement lifting/lowering lever
(operated by the right hand)
This lever is used to lift or low er the
implem ent.
By m oving the lever to the A direction,
the implem ent lifts up. By m oving the
lever to the B direction, the implem ent
low ers.
3. Control box
A control unit using a micro computer is
built in this m achine to control the
implem ent securing high w orking
efficiency. For m ore complete operation,
well understand the explanation below
before operating.
①
Cutting button
This button is used to rotate or stop the
rotary blades. By pressing the cutting
button, the lamp lights up. By low ering
the lifting lever to the auto B side, the
rotary blades rotate. By pressing the
lamp again, the lamp goes out and the
rotary blade stops.
If a trouble or error is detected in the
control unit, the lamp lights up.
Shibaura Europe BV
All manuals and user guides at all-guides.com
