Section 10 Diagnosis
64
Warning
●
If the engine does not work satisfactorily, be sure to stop the engine and diagnose referring to the list
below.
1. Engine
Condition Inspection
item
Remedy
Working safety switch
Press the brake pedal and turn the key switch to
the [Start] position.
Battery electrolyte solution level at the specified
line. Discharge.
Replenish the electrolyte to the specified line
and charge fully.
Loosened battery terminal or corrosion.
Clean and tighten the terminal securely. Coat
with grease for rust prevention.
Melted fuse.
Replace the fuse with new one.
Failed switch
Ask the service works to repair or replace.
Starter does not rotate
when the key switch is
turned.
Failed self starter motor
Ask the service works to repair or replace.
Fuel in the fuel tank
Supply light oil.
Air mixed in the fuel
Check the fuel pipe from he fuel tank to injection
pump.
Fuel cock at the [C] position
Move the fuel cock to [ON] position.
Starter rotates but the
engine does not start.
Key stop solenoid harness out of position
Connect the harness securely.
Air mixed in the fuel
Check the fuel pump from the fuel tank to
injection pump.
Failed injection pump
Repair or replace.
Water mixed in the fuel
Drain water and change with new light oil.
Clogged injection nozzle
Repair or replace.
Engine rotates irregularly.
Clogged fuel filter
Wash or replace.
Insufficient cooling water
Replenish the cooling water.
Loosened or failed fan belt
Adjust the tension or replace the belt.
Clogged radiator fin
Clean.
Insufficient engine oil
Replenish the oil.
Engine overheated
Running at overload
Reduce the load.
Clogged air cleaner
Check the air cleaner
Seized nozzle
Insufficient compression power
Valve clearance adjustment
Insufficient power of
engine
Injection timing
Have the service work repair.
Shibaura Europe BV
All manuals and user guides at all-guides.com
