Section 6 Operation and works
33
(1) Move the cock to the [Open] position.
(2) Take the driver’s seat.
(3) Step the brake fully or apply the parking
brake.
(4) Make sure that the forward/reverse pedal
is at the neutral position (not stepping).
(5) Push down the accelerator lever
frontward.
(6) By turning the key switch to the [HEAT]
position, the glow lamp among the
monitor lamps lights up.
(7) After the glow lamp goes out, turn the key
switch to the [START] position. When the
engine starts, leave the key. Make sure
that the charge lamp and the oil pressure
lamp in the monitor lamps go out. If the
lamps do not go out, stop the operation
immediately and find the cause.
(8) Return the accelerator lever and warm up
the engine for several minutes at the
idling speed.
<Warming up>
This machine operates hydraulically. If warming
up is neglected, the hydraulic system may fail
causing an accident.
In cold districts, as the temperature decreases,
oil viscosity increases so that hydraulic
operation may become slower or normal
pressure may not be obtained.
To prevent such troubles, be sure to warm up
the engine up.
②
Stopping the engine
●
By moving the accelerator lever to the [Low
speed] position and turning the main switch to
the [OFF] position, the engine stops.
3. Lifting and lowering the mower
By moving the lifting/lowering lever to the A
direction, the mower lifts and by moving the
lever to B direction, the mower lowers.
By leaving your hand from the lifting/lowering
lever, the lever returns automatically to the
neutral position.
Shibaura Europe BV
All manuals and user guides at all-guides.com
