Shibaura CM314 Скачать руководство пользователя страница 40

Страница: 40 / 74

Refueling the Tractor

The fuel tank filler cap

is located at the left

side of the tractor hood. Before removing the

cap, wipe all dust and dirt from around the cap

to prevent debris from falling into the tank while

filling.

Use an approved fuel container and check the

inside of the container periodically for

cleanliness. Fuel tank capacity is 50.5L.

NOTE: The fuel cap is a vented-type. Use

only an approved SHIBAURA replacement

cap to prevent fuel system-related problems.

If there is no filter on the storage tank or fuel

container, filter the fuel through a 100-mesh or

finer screen when filling the mower fuel tank.

Keep the mower tank as full as possible (without

filling to capacity) to minimize condensation.

NOTE: It is a good practice to fill the fuel

tank at the end of each day, as this will

reduce overnight condensation.

3-5

LUBRICATION AND MAINTENANCE

Содержание CM314











































































Результаты поиска

Содержание CM314

Отзывы:

Бренды по названию

Популярные бренды

Shibaura CM314, Руководство оператора

Результаты поиска

Содержание CM314

Отзывы:

Бренды по названию

Популярные бренды