SHG CHIEMSEE A, Руководство по эксплуатации

Страница: 28 / 32

Operating manual: Mobile speciality pump CHIEMSEE
SHG S
PECHTENHAUSER
H
OCHWASSER
-
UND
G
EWÄSSERSCHUTZ
G
MB
H
Gewerbestraße 3, D-86875 Waal, Germany www.spechtenhauser.de
Tel.: +49 (0)8246.9695-20 shg@spechtenhauser.de
Fax: +49 (0)8246.9695-24
0119BACHE28
27
7
Malfunctions; causes and remedy
Problem Cause Remedy
Motor does not run No power supply Check the fuses, replace if neces-
sary.
Check the power cable for dam-
age.
Blown fuses Replace fuses and locate the rea-
son for their failure
Pump runs but gives no water Pump or pressure line blocked Clean the pump or the pressure
line
Air in the pump Vent the pump and the pressure
line.
Vent the suction hose and the
non-return flap if a non-return flap
is used. All couplings must be
leak-proof.
Pump gives insufficient water Incorrect direction of rotation
(red phase control lamp lights up,
pump vibrates strongly) Reverse the direction of rotation
(see section 4.1)
Pressure loss in the system too
high Remove kinks in the pressure line
or use a wider pressure line
Pump head too high Connect a second CHIEMSEE
pump in series
Pressure line blocked Clean the pressure line
Viscosity of the pumped medium
too high Dilute the pumped medium if pos-
sible or use a more powerful
pump
Motor protection switch, tempera-
ture or leakage monitoring trips out Wrongly adjusted motor protection
switch Check the adjustment of the mo-
tor protection switch in the power
plug.
Right values: CHIEMSEE A: 9,5 A
CHIEMSEE B: 9,0 A
Viscosity of the pumped medium
too high If possible, dilute the pumped me-
dium or use a more powerful
pump
Power input too high Check the pump for blockages
and remove the blockages.
Motor running on two phases Replace defective fuse, or have
motor repaired if coil defective
Motor temperature too high Cool down the motor. If the motor
protection is still tripping out the
motor has to be checked by the
Spechtenhauser service.
Leaky motor The motor has to be checked by
the Spechtenhauser service.
In all further questions, please contact our customer service department.