Sherpa 901233, Инструкции по безопасности и руководство по эксплуатации

Страница: 7 / 20

7
Assembly Instructions
Assembly Instructions
Tools you will need:
• Open end wrench 10 & 13 mm
• Adjustable opening wrench (2) 20 cm long
• Slip joint pliers 23 cm long
• Philips screwdriver w/ medium blade
• Spray bottle of soap solution for leakage test
Parts supplied:
• Stand with tank housing
• Assembly post with 3 pcs post brackets
• 10 mm x 84 .5 cm (L) galvanized steel pipe + 60 cm gas hose conforming to local standard
codes (pressure regulator not included), or 140 cm gas hose only (if no gas pipe is used)
• Reflector 813 mm with 6 pcs washers Ø8 mm and 3 pcs M8 castle nuts
• 3 pcs 90 mm pins for reflector support
• 4 pcs bolts M6 x 10 mm for assembly post and burner
• 6 pcs bolts & nuts M6 x 35 mm for post and post brackets
• 3 pcs bolts M8 x 16 mm for post brackets and base
• 3 pcs ground fixture kit
• 6 pcs M6 x 10 mm ground fixer bolts & nuts