Sherpa 901233, Инструкции по безопасности и руководство по эксплуатации

Страница: 6 / 20

6
Gas Requirements
Gas Requirements
• Use propane or LPG only .
• The heater is designed for use with 11-13 kg cylinder . Maximum size of cylinder
suitable for the appliance, w/ regulator attached, is Æ31 cm x 64 cm . Inner
dimension of stand within the supporting bars is Æ32 cm x 69 cm .
• The appliance requires approved gas hose in 60 cm length and a regulator, or a gas
hose in 140 cm length and a regulator if no gas pipe (approx . 84 cm) is used .
• Regulator maximum inlet pressure must not exceed 690 kPa (100 PSI) .
• Regulator outlet pressure to be 37 mbar .
• The hose and regulator assembly must conform to local standard codes .
• The installation must conform to local codes, or in the absence of local codes, to the
standard for the storage and handling of liquid petroleum gases .
• A dented, rusted or damaged gas cylinder may be hazardous and should be checked
by your gas supplier . Never use a gas cylinder with a damaged valve connection .
• The gas cylinder must be arranged to provide for vapor withdrawal from the
operating cylinder .
• Avoid twisting the flexible tubes and hoses.
• Never connect an unregulated gas cylinder to the heater .
• Disconnect the gas cylinder when the heater is not use .